基于包装功能的时间–温度指示器与食品新鲜度指示器研究进展

目的 从包装功能实现的角度分析研究时间–温度指示器和食品新鲜度指示器的原理、类型与发展趋势，指出开发设计时间–温度指示器和食品新鲜度指示器应完成的包装功能，为有效实现包装交流功能提供研究思路和技术支持。方法 列出现有食品包装功能在物理环境、周围环境和人类环境下的实现矩阵，通过研究时间–温度指示器和食品新鲜度指示器的实现原理和所满足的包装交流功能，探讨这2种技术提高矩阵中分值较低元素的可行性。结果 时间–温度指示器监测食品所经历的时间、温度的完整历程，有助于提高实现矩阵中ComA元素的分值;食品新鲜度指示器提供生理变化或微生物生长引起的食品质量变化的定性或半定量信息，有助于提高实现矩阵中ComH元素的分值。结论 时间–温度指示器和食品新鲜度指示器能够有效提升食品包装的交流功能，保证消费者安全，减少资源浪费，具有广阔的发展前景。     

PVDF压电纤维仿生柔性传感器水下传感特性研究

感知器官对于许多动物必不可少,尤其是生活在水下的生物。该文以聚偏二氟乙烯(PVDF)为材料,模仿水生动物海豹的触须设计制备了一种表面四电极PVDF压电纤维仿生柔性传感器。利用激振源测试所制备的传感器性能,包括输出不同的波形测试对不同激励的感知,对水动力的感知及对水下运动物体方向的感知。实验结果表明,该传感器对不同激励的感知性能很好,速度检测极限可达0.15 mm/s,且有良好的方向性检测能力,对水下情况感知的应用前景广。     

广义正交码索引调制系统的性能分析

摘 要：为了提高码索引调制（code index modulation，CIM）系统的传输效率，提出了一种具有更低复杂度的单输入单输出（single input single output，SISO）的广义正交码索引调制（generalized orthogonal code index modulation，GQCIM）系统。CIM 系统使用扩频码和星座符号传输信息，但只能激活两个扩频码索引和一个调制符号。而 GQCIM 系统以一种新颖的方式克服了只激活一个调制符号的限制，同时充分利用了调制符号的正交性，增加扩频码索引以传输更多的额外信息位，提高了系统的传输效率。此外，分析了GQCIM系统的理论性能，推导了误码率性能的上界。通过蒙特卡罗仿真验证了GQCIM系统的性能，对比发现GQCIM系统的理论和仿真性能一致。而且在相同的传输效率下，结果显示GQCIM系统的性能优于同样具有正交性的调制系统，如广义码索引调制（generalized code index modulation，GCIM）系统、CIM系统、码索引调制-正交空间调制（code index modulation aided quadrature spatial modulation，CIM-QSM）系统、码索引调制-正交空间调制（code index modulation aided spatial modulation，CIM-SM）系统、脉冲索引调制（pulse index modulation，PIM）系统。     

A hybrid damage model for simulating adiabatic shear bands

International Journal of Fracture - Adiabatic shear band (ASB) is one of the most important failure modes under high strain-rate deformation. In this work, we propose a hybrid damage model to...     

An Injectable Hydrogel for Simultaneous Photothermal Therapy and Photodynamic Therapy with Ultrahigh Efficiency Based on Carbon Dots and Modified Cellulose Nanocrystals

The convenience of injectable hydrogels that can provide high loading of diverse phototherapy agents and further long-time retention at the tumor site has attracted tremendous interest in simultaneous photothermal and photodynamic cancer therapies. However, to incorporate the phototherapy agents into hydrogels, complex modifications are generally unavoidable. Moreover, these phototherapy agents usually suffer from low efficiency and work at different irradiation wavelengths outside the near infrared windows. Hence, a method for the fabrication of an injectable hydrogel for simultaneous photothermal therapy and photodynamic therapy, through the Schiff-base reaction between amido modified carbon dots (NCDs) and aldehyde modified cellulose nanocrystals is proposed. The NCDs act as both phototherapy agents and crosslinkers to form hydrogels. Significantly, the NCDs demonstrate an extremely high photothermal conversion efficiency of 77.6% which is among the highest levels for photothermal agents and a high singlet quantum yield of 0.37 under a single 660 nm light-emitting diode irradiation. The hydrogels are examined through in vitro and in vivo animal experiments which show nontoxic and effectively tumor inhibition. Thus, the strategy of direct reaction of phototherapy agents and the matrix not only provides new strategies for injectable hydrogel fabrication but paves a new road for advanced tumor treatment.     

Eco-friendly and degradable red phosphorus nanoparticles for rapid microbial sterilization under visible light

Pathogens pose a serious challenge to environmental sanitation and a threat to public health.The frequent use of chemicals for sterilization in recent years has not only caused secondary damage to the environment but also increased pathogen resistance to drugs,which further threatens public health.To address this issue,the use of non-chemical antibacterial means has become a new trend for environmental disinfection.In this study,we developed red phosphorus nanoparticles(RPNPs),a safe and degradable photosensitive material with good photocatalytic and photothermal properties.The red phosphorus nanoparticles were prepared using a template method and ultrasonication.Under the irradiation of simulated sunlight for 20 min,the RPNPs exhibited an efficiency of 99.98%in killing Staphylococcus aureus due to their excellent photocatalytic and photothermal abilities.Transmission electron microscopy and ultraviolet–visible spectroscopy revealed that the RPNPs exhibited degradability within eight weeks.Both the RPNPs and their degradation products were nontoxic to fibroblast cells.Therefore,such RPNPs are expected to be used as a new type of low-cost,efficient,degradable,biocompatible,and eco-friendly photosensitive material for environmental disinfection.     

低功耗高性能的全MOS电压基准源设计

设计了一种基于亚阈值技术的全MOS电压基准源,采用共源共栅结构来增大PSRR,使用MOS管代替电阻,优化温度特性,使电路中大部分MOS管工作于亚阈值区。基于0.18μm CMOS工艺进行设计、版图绘制、和前、后仿真,在后仿真中得出相关参数值。对各参数做出详细分析,包括:一定温度范围内的温度系数;常温下基准输出电压;不同电源电压条件下的线性调整率、基准源静态电流及功耗,并对不同频率下的电源电压抑制比进行了对比。实验结果表明达到了低功耗高性能的设计目标。     

Electrical oscillation generation with current-induced resistivity switching in VO2 micro-channel devices

We report large amplitude modulation waveforms as large as ~ 10 V using vanadium dioxide micro-channel devices operating under current-controlled conditions. The self-sustained electrical oscillations were generated by controlling the applied current in the negative differential resistance region of the investigated devices. An appropriate value of internal capacitance was achieved as parasitic capacitance in the device structure to stabilize the electrical oscillations. This eliminates the need of an external pulsed source or any external passive component connected to the micro-channel devices. Amplitude and frequency of the oscillation were tuned by illuminating the device micro-channel with an external laser. An equivalent circuit model was developed to simulate the waveforms. A good agreement between experiment and simulation was verified.     

基于高频损耗比的干式空心电抗器制造缺陷检测方法及应用探讨

本文通过分析电抗器因制造工艺导致少匝和极限工艺偏差时600Hz损耗,提出高频损耗可作为电抗器制造缺陷的检测手段及其适用范围,并以600Hz的实测损耗与理论损耗之比是否超过1.5作为判据,以同组任两台损耗之比是否超过1.5作为辅助判据,同时列举应用实例.     

盾构机密封系统水压加载检测装置的研制

密封系统的密封性、可靠性等技术指标是决定盾构机水下隧道掘进能力的根本条件.规划中的琼州海峡、台湾海峡、白令海峡等水下隧道要求的密封压力值超过1.7MPa、掘进距离超过10km,远超现有的技术标准.因此需要根据隧道工程技术要求研制出具备一定冗余扩展能力的水压加载检测装置.该加载装置能够仿制盾构机在水下施工所处的工作环境,通过水压加载、气垫控制、着色检验等方式检测换刀装置、主驱动、盾尾等主要核心部件的密封性、可靠性等技术指标.此设备提供的实验结果能够为重大隧道工程规划和设备研制提供基础数据支持和实验论证.